248
GE STAR System From the MAIN MENU, press F4, F6, F7 and then F5 to access this
screen.
This screen allows you to change/view the parameters that pertain to
a GE STAR system. Press Tab to select the desired field, or press the
desired function key (F1 - F10). If a field is highlighted, use the UP/
DOWN arrow keys to select the desired choice or value.
Function Key Descriptions
F2 - ADD SYS Adds a system.
F3 - PREV SYS Accesses the previous system.
F4 - NEXT SYS Accesses the next system.
F5 - DELETE SYS Deletes a system. You will be prompted for confirmation before the
system is actually deleted.
Field Definitions
System Use the UP/DOWN arrow keys to select the desired GE STAR system.
or entered a number directly. You may also use the function keys to
scroll through the available choices. The radio may have a maximum
number of 7 systems.
Addressing Mode Use the UP/DOWN arrow keys to select Normal or Extended. The state
of this field determines the range of valid IDs that the radio can use.
Specifies the GE STAR addressing mode for the Radio ID.
The default is Disabled.
DFGE
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
MCS Model:
..CHANGE/VIEW:CONV:AUX:GE STAR SYSTEM
System.............1
GE STAR SYSTEM
--------------
Addressing Mode.........Extended Emergency Alarm......... Enabled
Radio ID....................0000 Monitor w Sil Emer.....Disabled
PTT ID Type..............Leading Impolite Retries.............10
PTT ID Sidetone.........Enabled
Pretime Duration (ms)........500 Revert Table
Baud Rate................400 bps
DOS......................Enabled Num Zone Channel
Unmute Hold-Off (ms)........550 ----------------
Coast Time (ms).............100 1 Blank Blank
2 Blank Blank
3 Blank Blank
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD PREV NEXT DELETE EXIT
SYS SYS SYS SYS
To Next Page
Loading...
Need help?
General