Motorola MCS 2000 User Manual

118
Phone
Configuration
At the MAIN MENU, press F4, F3 and then F4 to access this screen.
This menu allows you to edit telephone interconnect configurations
for a radio including stored telephone numbers and aliases. These
parameters are radio wide and apply to both Trunking and
Conventional signalling.
Press Tab to select the desired field, or press the desired function key
(F1 - F10). If the field is highlighted, use the UP/DOWN arrow keys to
select the desired choice or value. Enter the phone number directly.
Use the PgUp and PgDn keys to view additional pages of phone lists.
Function Key Definitions
F2 - ADD NUMBER Adds a new phone number entry.
F5 - DELETE NUMBER Deletes an existing phone number. You will be prompted before the
number is actually deleted.
F8 - ACCESS/DEACCESS Takes you to a screen where you can modify DTMF access codes.
F9 - DIAL OPTIONS Takes you to a screen where you can modify DTMF timing parameters.
Field Definitions
Man Acc Live Dialing Manual Access Live Dialing will function only on personalities with
unlimited phone access. Use the UP/DOWN arrow keys to enable/disable
this feature. If this feature is enabled, the user will be able to dial phone
numbers and access codes directly from the keypad during
transmission.
Note: When enabled, this selection will override the phone
dialing selection on the DIAL OPTIONS screen (F4/F3/F4/F9).
The default is Disabled.
DCD
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
MCS Model:
MAIN:CHANGE/VIEW:CONFIG:PHONE
PHONE CONFIGURATION
-------------------
Man Acc Live Dialing......Disabled Phone Num Display Format......None
Num Phone Number Phone Text
--- ------------ ------------
1 PHONE 1
2 PHONE 2
3 PHONE 3
4 PHONE 4
5 PHONE 5
6 PHONE 6
7 PHONE 7
8 PHONE 8
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD DELETE ACCESS DIAL EXIT
NUMBER NUMBER DEACCESS OPTIONS

Motorola MCS 2000 Specifications

General

Brand	Motorola
Model	MCS 2000
Category	Radio
Language	English