119
Phone Num Display Format Use the UP/DOWN arrow keys to select the format for displaying
telephone numbers. Valid choices are USA and None. If set to USA, the
phone numbers will be assumed to be in the format (area) code/
number.
The default is None which means no special formatting is required.
Phone Number Enter a phone number of up to 16 characters. The digits 0 through 9
are all valid, and so are the special characters “P”, “*” and “#”. The “P”
entry causes the radio to pause momentarily during dialing. The
length of the pause is programmable from the DIAL OPTIONS screen
(F9 from the PHONE CONFIGURATION screen).
Numbers can be added and deleted using the F2 and F5 keys
respectively. New numbers will be added at the end of the list. A total
of 19 numbers are allowed for HHCH models and models II and III and 10
numbers for all other models.
Phone Text Enter the alphanumeric name that will appear on the radio display for
this phone number. The maximum number of characters will be
determined by the radio model.
To Next Page
Loading...
Need help?
General