41
Function Key Descriptions
F2 - REF OSC
(Reference Oscillator Alignment)
Refer to your Radio Service Manual for the Reference Oscillator
Alignment procedure. This procedure should be attempted only by
qualified service personnel.
F3 - Tx PWR
(Transmit Power Alignment)
Refer to your Radio Service Manual for the Transmitter Power
Alignment procedure. This procedure should be attempted only by
qualified service personnel.
F4 - DEV BAL
(Transmit Deviation Balance
[Compensation] Alignment)
Refer to your Radio Service Manual for the Transmit Deviation Balance
(Compensation) Alignment procedure. This procedure should be
attempted only by qualified service personnel.
F5 - DEV LIMIT
(Transmit Deviation Limit
Alignment)
Refer to your Radio Service Manual for the Transmit Deviation Limit
Alignment procedure. This procedure should be attempted only by
qualified service personnel.
F6 - REF ATTEN
(Reference Softpot)
Refer to your Radio Service Manual for the Transmitter Deviation Limit
Alignment Reference Softpot procedure. This procedure should be
attempted only by qualified service personnel.
F8 - SECURE DEV
(SECURE Transmit Deviation)
Refer to your Radio Service Manual for the SECURE Transmit
Deviation Alignment procedure. This procedure should be attempted only
by qualified service personnel.
F9 - CUR LIMIT
(Transmit Current Limit)
This screen can be accessed only for VHF and UHF frequency band models.
Refer to your Radio Service Manual for the Transmit Current Limit
procedure. This procedure should be attempted only by qualified service
personnel.
To Next Page
Loading...
Need help?
General