Advanced Features
English
29
5 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
6 Release the PTT button to listen. When the target radio
responds, the green LED blinks and the display shows the
transmitting user's alias or ID.
7 If the Channel Free Indication feature is enabled, you hear a
short alert tone the moment the target radio releases the
PTT button, indicating the channel is free for you to respond.
Press the PTT button to respond.
OR
If there is no voice activity for a programmed period of time,
the call ends.
8 You hear a short tone. The display shows Call Ended.
NOTE: If you release the PTT button while the radio is setting
up the call, it exits without any indication and returns to
the previous screen.
Your radio may be programmed to perform a radio
presence check prior to setting up the Private Call. If
the target radio is not available, you hear a short tone
and see negative mini notice on the display.
The radio returns to the menu prior to initiating the
radio presence check.
Assigning an Entry to a Programmable
Number Key
Procedure:
1 g to access the menu.
2 b or c to Contacts and press g to select. The
entries are alphabetically sorted.
3 b or c to the required alias or ID and press g to
select.
4 b or c to Program Key and press g to select.
5 b or c to the desired number key and press g to
select.
OR
If the number key is currently assigned to another entry, the
display shows The Key is Already Used and then, the
first line of the display shows Overwrite?.
b or c to Yes and press g to select.
6 The display shows Contact Saved and a positive mini
notice.
7 The screen automatically returns to the previous menu.
NAG.book Page 29 Monday, March 25, 2013 4:59 PM
To Next Page
Loading...
