Advanced Features
English
53
Turning the Voice Operating Transmission (VOX)
Feature On or Off
This feature allows you to initiate a hands-free voice activated
call on a programmed channel. Your radio automatically
transmits, for a programmed period, whenever the microphone
on the VOX-capable accessory detects voice.
NOTE: You may need to turn off the radio and power it up
again after detaching the VOX-capable microphone
from it to allow the radio to switch to another valid
accessory. The microphone source must be
preconfigured and the VOX-capable accessory
attached to the preconfigured port.
Pressing the PTT button during radio operation disables VOX.
To re-enable VOX, do one of the following:
• Turn the radio off and power it on again, OR
• Change the channel via the Scroll Up/Down buttons, OR
• Change the channel via the Channel Up/Down Button, OR
• Follow the procedure below.
NOTE: Turning this feature on or off is limited to radios with
this function enabled. Check with your dealer or system
administrator for more information.
Procedure:
Press the programmed VOX button to toggle the feature on or
off.
OR
Follow the procedure below.
1 g to access the menu.
2 b or c to Utilities and press g to select.
3 b or c to Radio Settings and press g to select.
4 b or c to VOX and press g to select.
5 b or c to On to enable VOX. The display shows 9
beside On.
OR
b or c to Off to disable VOX. The display shows 9
beside Off.
If the Talk Permit Tone feature is enabled (see Turning the Talk
Permit Tone On or Off on page 48), use a trigger word to
initiate the call. Wait for the Talk Permit Tone to finish before
speaking clearly into the microphone.
To Next Page
Loading...
