Keypad Microphone Features
English
60
6 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
results.
The alias search is case-insensitive. If there are two or more
zones with the same name, the radio displays the zone that
is listed first in the zone list.
7 Press g to select.
8 The display shows <Zone> Selected momentarily and
returns to the selected zone screen.
Making a Private Call by Manual Dial
Procedure:
1 g to access the menu.
2 b or c to Contacts and press g to select.The
entries are alphabetically sorted.
3 b or c to Manual Dial and press g to select.
4 b or c to Radio Number and press g to select.
5 If there is a previously dialed subscriber ID, the ID appears
along with a blinking cursor.
Use the keypad to edit the subscriber ID.
OR
Use the keypad to enter a new subscriber ID.
6 Press the PTT button to make the call. The green LED lights
up. The display shows the destination alias.
7 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
8 Release the PTT button to listen. When the target radio
responds, the green LED blinks.
NAG.book Page 60 Monday, March 25, 2013 4:59 PM
To Next Page
Loading...
