Keypad Microphone Features
English
66
6 A blinking cursor appears. If needed, key in the alias for that
ID and press g .
7 The display shows positive mini notice.
You can also store an ID without an alias.
Making a Call Alert by Manual Dial
Procedure:
1 g to access the menu.
2 b or c to Contacts and press g to select.
3 b or c to Manual Dial and press g to select.
4 A blinking cursor appears. Enter the subscriber ID you want
to send the Call Alert to and press g .
5 b or c to Call Alert and press g to select.
6 The display shows Call Alert and the subscriber alias or
ID, indicating that the Call Alert has been sent.
7 The green LED lights up when your radio is sending the Call
Alert.
8 If the Call Alert acknowledgement is received, the display
shows positive mini notice.
OR
If the Call Alert acknowledgement is not received, the
display shows negative mini notice.
RSSI Values
Your radio shows the Received Signal Strength Indicator (RSSI)
icon at the top of your display. This feature allows you to view
the RSSI values.
Procedure:
When you are on the Home screen:
1 Press < three times (<-<-<) and long press <, all within 8
seconds.
2 The display shows the current RSSI values.
Long press the e button to return to the Home screen.
See Display Icons on page 9 for details on the RSSI icon.
NAG.book Page 66 Monday, March 25, 2013 4:59 PM
To Next Page
Loading...
