Motorola MOTOTRBO DM4400 - Page 40

5-12 Disassembly/Reassembly Procedures: Disassembling and Reassembling the Control Head– General
2. Remove the screw with TORX Plus™ 6IP driver to remove speaker retainer as shown in
Figure 5-13.
Figure 5-13 Speaker Retainer Removal
3. Remove the speaker and mic wire from speaker tray as shown in Figure 5-14.
Figure 5-14 Speaker and Mic Boot Removal
Speaker Retainer
Screw
Front Housing
Speaker and Mic wire
Front Housing
Speaker Tray
Speaker