Disassembly/Reassembly Procedures: Disassembling and Reassembling the Control Head– General 5-17
3. Reassemble the keypad board (together with speaker tray and keypad flex) to the front
housing as shown in Figure 5-22.
NOTE: Please ensure that the PTT Flex is not hidden when reassembling the keypad board.
Figure 5-22 Keypad Board Reassembly
4. Reassemble the color display to the front housing. Reconnect the color display flex to the 26
pin connector and PTT flex to 20 pin connector as shown in Figure 5-23.
Figure 5-23 Color Display Reassembly
Front Housing
Speaker Tray
Keypad Flex
Keypad PCBA
Front Housing
Color Display
Color Display Flex
26 Pin Connector
Keypad Board
PTT Flex
To Next Page
Loading...