Motorola MOTOTRBO DM4601 - Page 36

5HFHLYLQJDQG0DNLQJ&DOOV
(QJOLVK

If there is no voice activity for a predetermined period of
time, the call ends.
 You hear a short tone. The display shows Call Ended.
0DNLQJD3KRQH&DOO
 Press the programmed 3KRQH button to enter into the
Phone Entry list.
^ or v to the required subscriber alias or
ID, and press
g to select.
25
Press the programmed2QH7RXFK$FFHVV button.
 If the access code was not preconfigured, the display shows
Access Code:. Enter the access code and press
g to
proceed.
 Press the 377 button to make the call. The green LED lights
up. The Phone Call icon appears in the top right corner. The
first text line shows the subscriber alias. The second text
line displays the call status.
 If successful:
The DTMF tone sounds. You hear the dialing tone of the
telephone user. The first text line shows the subscriber alias.
The Phone Call icon remains in the top right corner.
25
If unsuccessful:
A tone sounds and the display shows Phone Call Failed.
Your radio returns to the Access Code input screen.
If the access code was preconfigured in the Contacts list,
the radio returns to the screen you were on prior to initiating
the call.
 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
 Press the 377 button to talk and release it to listen.
To enter extra digits, if requested by the Phone Call:
Enter the extra digits using the keypad and press
g to
proceed. The DTMF tone sounds and the radio returns to
the previous screen.
 Press e to end the call.
If de-access code was not preconfigured in the Contacts list,
the display shows De-Access Code:. Enter the de-access
code and press
g to proceed. The radio returns to the
previous screen.
25
Press 2QH7RXFK$FFHVV button. The DTMF tone sounds.
If the entry for the 2QH7RXFK$FFHVV button is empty, a
negative indicator tone sounds.
 The DTMF tone sounds and the display shows Ending
Phone Call.
 If successful:
A tone sounds and the display shows Call Ended.
25
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Steps 6
and 7 or wait for the telephone user to end the call.
