Motorola MOTOTRBO DM4601 - Page 37

5HFHLYLQJDQG0DNLQJ&DOOV
(QJOLVK

When the telephone user ends the call, a tone sounds and the
display shows Call Ended.
If the call ends while you are entering the extra digits requested
by the Phone Call, your radio returns to the screen you were on
prior to initiating the call.
During channel access, press
e to dismiss the call attempt
and a tone sounds.
During the call, when you press 2QH7RXFK$FFHVV button with
the deaccess code preconfigured or enter the deaccess code
as the input for extra digits, your radio attempts to end the call.
The access or deaccess code cannot be more than 10
characters.
6WRSSLQJD5DGLR&DOO
This feature allows you to stop an ongoing Group or Private Call
to free the channel for transmission. For example, when a radio
experiences a “stuck microphone” condition where the 377
button is inadvertently pressed by the user.
Your radio must be programmed to allow you to use this feature.
3URFHGXUH
While on the required channel:
 Press the programmed 7UDQVPLW,QWHUUXSW5HPRWH'HNH\
button.
 The display shows Remote Dekey.
 Wait for acknowledgment.
 The radio sounds a positive indicator tone and the display
shows Remote Dekey Success, indicating that the channel
is now free.
25
The radio sounds a negative indicator tone and the display
shows Remote Dekey Failed.
On the interrupted radio, the display shows
Call Interrupted , and the radio sounds a negative indicator
tone until you release the PTT button, if it is transmitting an
interruptible call that is stopped via this feature.