English
9
Programmable Buttons
Your dealer can program the programmable buttons as 
shortcuts to radio functions or preset channels/groups 
depending on the duration of a button press:
• Short press – Pressing and releasing rapidly.
• Long press – Pressing and holding for the programmed 
duration.
• Hold down – Keeping the button pressed.
NOTE: The programmed duration of a button press is 
applicable for all assignable radio/utility functions or 
settings. See Emergency Operation on page 32 for 
more information on the programmed duration of the 
Emergency button.
Assignable Radio Functions
Call Forwarding – Toggles Call Forwarding on or off.
Voice Announcement for Channel – Plays zone and channel 
announcement voice messages for the current channel. This 
function is unavailable when Voice Announcement is disabled.
Emergency – Depending on the programming, initiates or 
cancels an emergency alarm or call.
Intelligent Audio On/Off – Toggles Intelligent Audio on or off. 
Manual Site Roam*
‡
 – Starts the manual site search.
Mic AGC On/Off – Toggles the internal microphone automatic 
gain control (AGC) on or off. 
Monitor – Monitors a selected channel for activity.
Nuisance Channel Delete*
‡
 – Temporarily removes an 
unwanted channel, except for the Selected Channel, from the 
scan list. The Selected Channel refers to the user’s selected 
zone/channel combination from which scan is initiated.
Notifications – Provides direct access to the Notifications List.
One Touch Access – Directly initiates a predefined 
Private, Phone or Group Call, a Call Alert.
Permanent Monitor*
‡
– Monitors a selected channel for all 
radio traffic until function is disabled.
Privacy   – Toggles privacy on or off.
Phone   – Provides direct access to the Phone Contacts list.
Phone Exit   – Ends the current Phone Call. 
Repeater/Talkaround*
‡
 – Toggles between using a repeater 
and communicating directly with another radio.
* Not applicable in Capacity Plus
‡ 
Not applicable in Linked Capacity Plus
NDP_ANZ-EMEA.book  Page 9  Thursday, July 19, 2012  8:22 AM