Receiving and Making Calls
English
20
If there is no voice activity for a predetermined period of
time, the call ends.
6 You hear a short tone. The display shows Call Ended.
You can also make a Private Call via Contacts (see Making a
Private Call from Contacts on page 28), manually dial a
Private Call (see Making a Private Call by Manual Dial on
page 68) or perform a quick alphanumeric search for the
required target alias via a keypad entry (see Making a Group,
Private or All Call by Alias Search on page 70).
Making an All Call
This feature allows you to transmit to all users on the channel.
Your radio must be programmed to allow you to use this feature.
Procedure:
1 Select the channel with the active All Call group alias or ID.
See Selecting a Channel on page 15.
2 Press the PTT button to make the call. The green LED lights
up. The display shows the Group Call icon and All Call.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
Users on the channel cannot respond to an All Call.
Making a Selective Call
Just like a Private Call, while you can receive and/or respond to
a Selective Call initiated by an authorized individual radio, your
radio must be programmed for you to initiate a Selective Call.
Procedure:
1 Select the channel with the active subscriber alias or ID.
See Selecting a Channel on page 15.
2 Press the PTT button to make the call. The green LED lights
up. The display shows the Private Call icon and the
subscriber alias.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
4 Release the PTT button to listen. When the target radio
responds, the green LED blinks.
5 If there is no voice activity for a predetermined period of
time, the call ends.
6 You hear a short tone. The display shows Call Ended.
To Next Page
Loading...
