Advanced Features
English
46
A subject line may be shown if the message is from an
e-mail application.
The icon beside each message indicates the status of the
message (see Sent Item Icons on page 11).
Sending a Sent Text Message
You can select one of the following options while viewing a sent
text message:
• Resend
• Forward
• Delete
Procedure:
1 Press g again while viewing the message.
2 b or c to Resend and press g to select.
3 The display shows transitional mini notice, confirming that
the same message is being sent to the same target radio.
4 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
If the text message fails to send, the radio returns you to the
Resend
option screen. Press g to resend the message to the
same subscriber/group alias or ID.
NOTE: Changing the volume, and pressing any button, except
for
g , b , or c , returns you to the message.
The radio exits the Resend option screen if you press
the PTT button to initiate a Private or Group Call, or to
respond to a Group Call. It also exits the screen when
the radio receives a text message, an emergency call
or alarm, or a call alert.
The display returns to the Resend option screen if you
press the PTT button to respond to a Private Call
(except if the radio is displaying the Missed Call
screen), and at the end of an All Call.
Press
b or c to access the Forward, Edit, or Delete
option screen:
• Select Forward to send the selected text message to another
target radio (see Forwarding a Text Message on page 45).
You can also manually select a target radio address using a
keypad microphone (see Forwarding a Text Message by
Manual Dial on page 75).
• Select Delete to delete the text message.
To Next Page
Loading...
