Advanced Features
English
51
Analog Message Encode
Your radio is able to send preprogrammed messages from the
Message list to a radio alias or to the dispatcher.
Sending MDC Message Encode to Dispatcher
Procedure:
1 g to access the menu.
2 b or c to Message and press g to select.
3 b or c to Quick Text and press g to select.
4 b or c to the required message. Press g to send.
5 The display shows transitional mini notice, confirming your
message is being sent.
6 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Analog Status Update
Your radio is able to send preprogrammed messages from the
Status List indicating your current activity to the dispatcher (for
MDC systems).
The last acknowledged message is kept at the top of the Status
List. The other messages are arranged in alphanumeric order.
Sending Status Update to Predefined Contact
Procedure:
1 g to access the menu.
2 b or c to Status and press g to select.
3 b or c to the required status. Press g to select.
4 b or c to Set as Default. Press g to send the
status update.
5 The display shows transitional mini notice, confirming your
status update is being sent.
To Next Page
Loading...
