4
LET’S GET STARTED
1. Turn o and disconnect any existing modems or routers on your network.
2. Connect coax cable that has active cable service to the modem’s
COAX connector. Ensure that you have access to the bottom label
during setup and activation of the modem.
3. Plug the MT8733 into a power outlet using the power adapter and
turn on the power button on the back of the device.
4. Wait for the online light ( for 3.0, or for 3.1) to stop flashing
and remain on for at least 1 minute. This process may take up to 15
minutes and the modem may reboot multiple times.
Note: You may use a coax splitter to share the cable connectivity with your
TV. Use a two-way splitter with a top frequency of 1,000 MHz or higher.
Please note this may reduce the device’s performance.
ACTIVATE WITH XFINITY
1. Activate your modem by following Xfinity’s activation process.
You can find information on this process on their website
xfinity.com/activate.
2. Connect your computer or mobile device to your MT8733 using one
of the following methods:
• Connect via WiFi using the SSID and password on the bottom of
the modem.
• Connect via one of the Ethernet ports found on the back of the
modem.
3. Confirm that your MT8733 is connected to the internet by visiting a
website. If you are unable to access a website, see Troubleshooting Tips.
4. Download motosync and set up your WiFi. See next page >
To Next Page
Loading...
