Motorola MTX-900 Classic - Operating Procedures; To Turn the Radio on and off; To Set the Volume Level; Selecting Channels

11
M
T
X
-
8
0
0
C
L
A
S
S
I
C
T
Y
P
E
I
Operating Procedures
After a fully charged battery and an antenna have been
connected to the radio, you may begin operating your radio. If
necessary, review the preliminary information to be sure you
understand the radio's features, controls, and indicators.
MTX-810
VOL
To Turn the Radio On and Off
Turn the on/off switch in a
clockwise direction. If the radio is
not already turned on, the knob
will click as it is turned.
To turn the radio off, turn the
switch counterclockwise until it
clicks.
To Set the Volume Level
The volume set button allows
you to adjust the radio receiver
volume before a transmission is
received. Press the volume set
button on the side of the radio.
You will hear the volume set tone.
To increase the volume
level, turn the volume control
knob clockwise. To decrease the
volume level, turn the knob
counterclockwise.
Selecting Channels
To select a desired channel,
adjust the rotary and the toggle
switches to the desired channel
position. The indicator mark on
the rotary switch designates the
currently selected position.
ABC
1
2
3
4
5
6
*