27
English
FRONT PANEL
PROGRAMMING MODE
Main
Menu
1st Level
Sub-Menu
2nd Level
Sub-Menu
Settings Remarks
LIST 3 (*)
(Scan List 3)
01-XXX
02-XXX
…
15-XXX
16-XXX
_ _ _
001
…
099
Allows you to set members of Scan List 3. “XXX “denotes the selected
scan list member. “_ _ _” shows that no scan list member is selected.
User can also use the button or the button to scroll the
valid channel list and press PTT to set the selection. Or user can
directly enter valid channel number via keypad and press PTT to set the
selection. (*)
LIST SEL
(Scan List Select)
CH-001
…
CH-099
LIST1 (Scan List 1)
LIST2 (Scan List 2)
LIST3 (Scan List 3)
Allows you to set the scan list for a selected channel.
SCAN TYP
(Scan Type
Select)
CH-001
…
CH-099
NORMAL
PRIORITY
Allows you to set scan type either Normal Scan or Priority Scan for a
selected channel.
PRIORITY
(Priority Channel
Select)
LIST1
(Scan List 1)
_ _ _
...
XXX
Allows you to set priority channel for scan list 1. “XXX” denotes the
selected priority channel. “_ _ _” shows that no priority channel is
selected. User can also use the button or the button
to scroll the valid channel list and press PTT to set the selection.
LIST2
(Scan List 2)
_ _ _
...
XXX
Allows you to set priority channel for scan list 2. “XXX” denotes the
selected priority channel. “_ _ _” shows that no priority channel is
selected. User can also use the button or the button
to scroll the valid channel list and press PTT to set the selection.
LIST3
(Scan List 3)
_ _ _
...
XXX
Allows you to set priority channel for scan list 3. “XXX” denotes the
selected priority channel. “_ _ _” shows that no priority channel is
selected. User can also use the button or the button
to scroll the valid channel list and press PTT to set the selection.
(*) Only supported in Full Keypad Models.
To Next Page
Loading...
