To Next PageTo Next Page
Need help?Do you have a question about the Motorola Radius PM400 and is the answer not in the manual?
General| Brand | Motorola |
|---|---|
| Model | Radius PM400 |
| Category | Two-Way Radio |
| Language | English |
Warnings about radio transmitter disrupting anti-skid braking.
Precautions for radio installation near braking systems.
Procedures to test radio interference with vehicle braking.
Guidelines for planning radio mounting and cable routing.
Step-by-step instructions for installing the DC power cable.
Step-by-step guide for physically mounting the radio using the trunnion.
Guidelines for antenna installation and RF safety compliance.
Advice on choosing optimal antenna locations for performance and safety.
Steps for mounting the antenna and connecting its cable.
Instructions for installing the radio into a dashboard using a kit.
Steps for mounting and connecting an external speaker.
Guidance on selecting a location and mounting a visor microphone.
Detailed explanation of each pin on the accessory connector.
Explanation of noise entering the radio via the antenna.
Description of noise entering the radio through electrical connections.
Explanation of noise picked up from proximity to other wiring.
Methods and tools for identifying sources of radio noise.
Common sources of radio noise in vehicles and how to identify them.
Addressing noise generated by the vehicle's ignition system.
Specific steps to suppress noise from the ignition coil.
Suppressing high-pitched whine noise from the alternator or generator.
Methods to suppress erratic popping noises from the voltage regulator.
Importance of ground bonding for reducing static charge and noise.
