Safety-iii
INSTALLATION REQUIREMENTS FOR COMPLIANCE
WITH RADIO FREQUENCY (RF) ENERGY EXPOSURE
SAFETY STANDARDS
ATTENTION!
This radio is intended for use in occupational/controlled conditions, where users have full knowledge
of their exposure and can exercise control over their exposure to meet FCC limits. This radio device is
NOT authorized for general population, consumer, or any other use.
To ensure compliance to RF Energy Safety standards:
• Install only Motorola approved antennas and accessories.
• Be sure that antenna installation is per Chapter 4 of this manual.
• Be sure that Product Safety and RF Safety Booklet enclosed with this radio is available to the end user upon
completion of the installation of this radio.
Before using this product, the operator must be familiar with the RF energy awareness information and
operating instructions in the Product Safety and RF Exposure booklet enclosed with each radio (Motorola
Publication part number 68P81095C99) to ensure compliance with Radio Frequency (RF) energy exposure.
For a list of Motorola-approved antennas and other accessories, visit the following web site which lists
approved accessories for your radio model: http://www.motorola.com/cgiss/index.shtml.
To Next Page
Loading...
Need help?
General
