Motorola PM400 User Manual

PM400
™
Commercial Series
Two-Way Radio User Guide
Manuel de l'utilisateur
de la radio bidirectionnelle
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office.
All other product or service names are the property of their respective owners.
© Motorola, Inc. 2004. All rights reserved. Printed in U.S.A.
MOTOROLA et le logotype au M stylisé sont enregistrés auprès du Bureau des marques et brevets des États-Unis.
Tous les autres noms de produits et de services sont la propriété de leurs titulaires respectifs.
© Motorola, Inc. 2004. Tous droits réservés. Imprimé aux États-Unis.
*6881096C32*
6881096C32-B
96C32-A_cvr.qxd 7/28/2004 1:43 PM Page 1

Motorola PM400 Specifications

General

Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz
Channel Spacing	12.5/20/25 kHz
IP Rating	IP54
Power Output	VHF: 1-25W, UHF: 1-25W
Weight	335g (with standard battery)
Signaling	DTMF
Operating Temperature	-30°C to +60°C
Channel Capacity	64 channels

Summary

Safety Information

Product Safety and RF Exposure Compliance

Information regarding safe usage and RF exposure compliance.

Getting Started with Your Radio

Basic Radio Operations

Instructions for powering on/off and adjusting volume.

Channel Selection Procedures

How to select LTR and Conventional radio channels.

Receiving and Transmitting Calls

Steps for receiving and transmitting radio communications.

Monitor Modes Explanation

Using Silent and Open Squelch Monitor modes for traffic monitoring.

Repeater or Talkaround Mode

Selecting between repeater and direct radio-to-radio communication.

Radio Calls and Communications

Selective Radio Inhibit and Calls

Selective radio inhibit, receiving and sending selective calls.

Call Alerts and Repeater Access

Radio Check and Emergency Alerts

Performing radio checks and managing emergency alerts.

Scan Operations

Scan Feature Overview and Talkback

Overview of scan features, talkback, and basic scanning.

System and Auto Scan

How to start, stop, and use system and auto scan modes.

Scan List Management

Deleting nuisance channels, editing, and prioritizing scan lists.

Phone Features

Phone Mode Operations

Phone List Management and Access Codes