34
English
SCAN
START SYSTEM SCAN G
Press the preprogrammed Scan button to start
System Scan (see page 18).
– or –
STOP SYSTEM SCAN
Press the preprogrammed Scan button to stop
System Scan (see page 18).
– or –
Note: Your dealer/programmer can preprogram
your radio when exiting System Scan to
automatically revert to the last scan
channel/talkgroup that had activity on it
or to automatically revert to the channel/
talkgroup where scan was initiated.
1
G or H to select a channel/talkgroup that
contains a Scan list.
2
D to enter menu mode.
3 G or H until
4 D to select
The display shows the current scan status.
5 G or H until
6 D to select the current setting.
SYS SCAN
SYS SCAN
SCAN ON
1 D to enter menu mode.
2
G or H until
3 D to select
The display shows the current scan status.
4
G or H until
5 D to select the current setting.
• The Gsymbol disappears from the
display.
SYS SCAN
SYS SCAN
SCAN OFF
04_Scan.fm Page 34 Monday, August 2, 2004 3:09 PM
To Next Page
Loading...
