38
English
SCAN
PRIORITIZE A CHANNEL/
TALKGROUP IN A SCAN LIST
You may want to check the activity on one or
two channels/talkgroups more frequently than
others. You can do this by prioritizing them:
Note: If you are receiving on a non-priority
channel/talkgroup and traffic becomes
active on a priority channel/talkgroup,
your radio will automatically switch to
that priority channel/talkgroup and indi-
cate the activity with a short tone.
Set Priority Channels/Talkgroups
Note: You cannot have the same priority on
two different channels/talkgroups.
Priority
Channel/
Talkgroup
Scanning Sequence
None specified Ch1➠Ch2➠Ch3➠
Ch4➠…Ch1
Channel/
Talkgroup 2
(Priority 1)
Ch2➠Ch1➠Ch2➠Ch3➠
Ch2➠Ch4➠Ch2➠…Ch1
Channel/
Talkgroup 2
(Priority 1) and
Channel/
Talkgroup 8
(Priority 2)
Ch2➠Ch1➠Ch8➠Ch3➠
Ch2➠Ch4➠Ch8➠…Ch1
1
D to enter menu mode.
2
G or H until
3
D to select
4
G or H until
5
D to select
6
G or H until
7
D to select
8
G or H until
– or – until
9
D to select the desired priority level.
You see the current priority channel/talkgroup.
PROG LST
PROG LST
SCAN LST
SCAN LST
EDIT PRI
EDIT PRI
PRI #1
PRI #2
04_Scan.fm Page 38 Monday, August 2, 2004 3:09 PM
To Next Page
Loading...
