Motorola PM400 User Manual

16
English
RADIO OVERVIEW
PROGRAMMABLE BUTTONS
Your radio has four programmable buttons.
Your dealer/programmer can program these
buttons as shortcuts to various radio features.
Check with your dealer/programmer for a
complete list of functions your radio supports.
Programmable buttons include:
• The four front buttons (
C, D, E, and
F).
• The three buttons (A, B, and C) of the
optional DTMF microphone.
Some buttons can access up to two features,
depending on the type of button press:
• Short Press — quickly pressing and
releasing the programmable buttons,
or
• Long Press — pressing and holding the
programmable buttons for a
preprogrammed period of time,
or
• Hold Down — pressing and holding down
the programmable buttons while checking
status or making adjustments.
The table on page 17 summarizes the
programmable features available and shows
the page number where the feature is
explained.
In the “Button” column, have your dealer/
programmer record the name of the
programmable button next to the feature that
has been programmed to it.
The dealer/programmer can use the
abbreviations (P1, P2, P3, or P4) shown in the
radio illustration on page 11.
Also, where appropriate, have your dealer/
programmer indicate whether the button press
requires a short press, a long press, or needs
to be held down.
Phone Mode — Enabled
Option Board Enabled Disabled
Escalert Enabled Disabled
Programmable
Buttons
Positive
Indicator Tone
Negative
Indicator Tone
01_Overview.fm Page 16 Friday, August 6, 2004 2:23 PM

Motorola PM400 Specifications

General

Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz
Channel Spacing	12.5/20/25 kHz
IP Rating	IP54
Power Output	VHF: 1-25W, UHF: 1-25W
Weight	335g (with standard battery)
Signaling	DTMF
Operating Temperature	-30°C to +60°C
Channel Capacity	64 channels