Motorola PM400 - Transmit an LTR Call; Transmit a Conventional Call

24
English
GETTING STARTED
TRANSMIT AN LTR CALL TRANSMIT A CONVENTIONAL
CALL
1
G or H to select the appropriate LTR
channel/talkgroup.
2
Hold the microphone in a vertical position at
a distance of about 1 to 2 inches
(2.5 to 5 cm) from your mouth.
3
Press and hold the PTT button.
–or–
Press and release the PTT button and wait 3
seconds.
• If access to the trunked system was
successful, the red LED indicator lights
steady.
• If access to the trunked system was
unsuccessful, the red LED indicator
flashes, indicating that the system was
busy or out-of-range.
4
With the PTT button depressed, speak
clearly into the microphone
5
Release the PTT button to listen.
1 Turn your radio on.
2 G or H to select the desired channel.
3 Hold the microphone vertically 1 to 2 inches
(2.5 to 5 cm) from your mouth. Press the
PTT button to talk.
• The red LED indicator lights steady while
the call is being sent.
4 Release the PTT button to listen.
02_GetStarted.fm Page 24 Monday, August 2, 2004 2:58 PM