Motorola PM400 User Manual

21
English
GETTING STARTED
GETTING STARTED
TURN THE RADIO ON OR OFF
ADJUST THE VOLUME
Turn the On/Off/Volume Control knob
clockwise to increase the volume, or
counterclockwise to decrease the volume.
– or –
Note: Your dealer/programmer can
preprogram one of the programmable
buttons to Volume Set.
ON OFF
Rotate the On/Off/
Volume Control knob
clockwise. If power-up
is successful, you will
hear the Self-Test Pass
Tone ( ) and
see the green LED
indicator and display
icons light momentarily.
If the radio fails to
power up, you will hear
the Sel f Tes t Fai l Ton e
( ). The radio
will need to be returned
for re-programming.
Rotate the On/Off/
Volume Control knob
counterclockwise until
you hear a click and
both the display and
LED indicators turn off.
P
PERS
4
On/Off/Volume
Control Knob
1 Hold down the Volume Set button (see
page 17).
• You will hear a continuous tone.
2 Turn the On/Off/Volume Control knob to
the desired volume level.
3 Release the Volume Set button.
02_GetStarted.fm Page 21 Monday, August 2, 2004 2:58 PM

Motorola PM400 Specifications

General

Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz
Channel Spacing	12.5/20/25 kHz
IP Rating	IP54
Power Output	VHF: 1-25W, UHF: 1-25W
Weight	335g (with standard battery)
Signaling	DTMF
Operating Temperature	-30°C to +60°C
Channel Capacity	64 channels