27
English
GETTING STARTED
You can select channels/talkgroups to enable
or disable VOX as preprogrammed by your
dealer/programmer.
PROGRAM PL/DPL CODES
Use this feature to edit the Private-Line/Digital
Private-Line codes for a selected channel/
talkgroup.
1
G or H to select a channel/talkgroup that
has been preprogrammed to enable VOX.
Note: Pressing the PTT button disables
VOX.
2 G or H to select a channel/talkgroup that
has not been preprogrammed to disable
VOX.
1 D to enter menu mode.
2
G or H until
3
D to select
EDIT PL
EDIT PL
4
G or H until
– or – until
5
D to select the current setting.
6
G or H to scroll through the standard
TPL frequencies or DPL codes.
– or –
Enter a non-standard or standard 4-digit
TPL frequency or the 3-digit octal code
(numbers 0-7 only) for DPL via the DTMF
microphone keypad.
7
D to confirm selection.
8
C until you exit menu mode.
RX XXX.X
TX XXX.X
02_GetStarted.fm Page 27 Monday, August 2, 2004 3:43 PM
To Next Page
Loading...
