26
English
GETTING STARTED
HOME REVERT AUTOKEY (1 & 2)
If a Revert Memory Channel is an LTR
talkgroup, the Home Revert AutoKey feature
automatically keys-up and transmits an MDC
PTT ID. If a Revert Memory Channel is
programmed as a Conventional channel, the
radio will not key-up (see page 17).
SET LOCAL OR DISTANCE MODE
Use this feature between Local mode (low
sensitivity) and Distance mode (normal
sensitivity). Local mode reduces interference
from other radios in close proximity. Distance
mode improves the radio’s range.
Press the preprogrammed Local/Distance
button (see page 17) to toggle between Local
and Distance mode.
VOX OPERATION
When hands-free operation is desired, your
radio can transmit by voice alone using the
VOX feature when you speak through a voice
activated external microphone that is
connected to your radio.
Note: A voice activated external microphone
must be connected to your radio prior to
power-up of the radio in order to activate
the VOX feature.
To enable or disable VOX operation on a
channel/talkgroup, press the preprogrammed
VOX button (see page 18).
Note: Pressing the PTT button disables VOX.
– or –
You can select channels/talkgroups to enable
or disable VOX as preprogrammed by your
dealer/programmer.
1
G or H to select a channel/talkgroup that
has been preprogrammed to enable VOX.
Note: Pressing the PTT button disables
VOX.
2
G or H to select a channel/talkgroup that
has not been preprogrammed to disable
VOX.
02_GetStarted.fm Page 26 Friday, August 6, 2004 2:19 PM
To Next Page
Loading...
