Motorola P160 Series

28
FRONT PANEL
PROGRAMMING MODE
English
Main Menu
1st Level
Sub-Menu
2nd Level
Sub-Menu
Settings Remarks
SCRMBLIN
(Voice Inversion
Scrambling)
CHANNEL
(Scrambling
Channel Select)
CH-001
…
CH-099
ENABLE
DISABLE
Allows you to enable or disable scrambling for a selected channel.
CODE
(Scrambling Code
Select)
–
CODE 1
CODE 2
Allows you to set the Scrambling Code between the two codes
available.
PHONE (*) ACC CODE
(Access Code)
–
XXXXXXXX Allows you to set access code for phone feature. “XXXXXXXX”
denotes the access code. User can use radio keypad to enter up to
16 characters consisting of 0,1,2,3,4,5,6,7,8,9,#,*.
DEACCCODE
(Deaccess Code)
–
XXXXXXXX Allows you to set deaccess code for phone feature. “XXXXXXXX”
denotes the access code. User can use radio keypad to enter up to
16 characters consisting of 0,1,2,3,4,5,6,7,8,9,#,*.
PHONE 01
–
NUMBER01 Allows you to set Phone No 1. User can use radio keypad to enter
up to 16 characters consisting of 0,1,2,3,4,5,6,7,8,9,#,*.
Note: NUMBER01 will appear if the phone list entry is empty.
–
NAME 01 Allows you to set alias for Phone No 1. User can use radio keypad to
enter up to 8 characters consisting of A – Z, 0 – 9, \, #, < >, *, +, _, /,
-.
Note: NAME 01 will appear if the phone list entry is empty.
ALIAS
(Assigned name)
EDIT XXXXXXXX Allows you to edit phone number. “XXXXXXXX” denotes the phone
number.
Note: The alias will appear at 1st menu level if the phone list entry is
not empty.
DELETE Selecting DELETE option will delete the phone entry.
(*) Only supported in Full Keypad Models.