19
English
GETTING STARTED
GETTING STARTED
TURN THE RADIO ON OR OFF
ADJUST THE VOLUME
Turn the On/Off/Volume Control knob
clockwise to increase the volume, or
counterclockwise to decrease the volume.
–or–
Note: Your dealer can preprogram one of the
programmable buttons to Volume Set.
SELECT A RADIO CHANNEL
Your radio offers 16 channels.
To select a channel, turn the Channel
Selector knob clockwise or counterclockwise
until you reach the desired channel.
ON OFF
Rotate the On/Off/
Volume knob
clockwise. If power-up
is successful, you will
hear the Self-Test
Pass Tone
( ) and see
the LED flash green.
If the radio fails to
power up, you will
hear the Self Test Fail
Tone ( ).
The radio will need to
be returned for re-
programming.
Rotate the On/Off/
Volume knob counter-
clockwise until you hear a
click and the LED
indicator turn off.
1 Hold down the Volume Set button (see
page 13).
• You will hear a continuous tone.
2 Turn the On/Off/Volume knob to the desired
volume level.
3 Release the Volume Set button.
02_GetStarted.fm Page 19 Thursday, August 7, 2003 12:10 PM
To Next Page
Loading...
