41Wireless
Bluetooth™ hands-free devices
Turn Bluetooth power on or off
Find it: Menu > Settings > Wireless & networks
> Bluetooth
Note: To extend battery life, turn off Bluetooth power
when not in use.
Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn the device on.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
2 Touch Menu > Settings > Wireless & networks
> Bluetooth settings.
3 Touch Bluetooth to turn on and scan. If Bluetooth
power is already on, touch Scan for devices.
4 Touch a device to connect.
5 If necessary, touch OK, or enter the device passkey
(like 0000) to connect to the device. When the device
is connected, the Bluetooth connected indicator
appears in the status bar.
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.
Reconnect devices
To automatically reconnect your smartphone with a
paired device, simply turn the device on.
To manually reconnect your smartphone with a paired
device, touch the device name in the Bluetooth devices
list.
Disconnect devices
To automatically disconnect your smartphone from a
paired device, simply turn the device off.
To manually disconnect your smartphone from a paired
device, touch the device name in the devices list, then
touch OK.
Change device name
Touch Menu > Settings > Wireless & networks
> Bluetooth settings > Device name. Enter a name and
touch OK.
MOTOPRINT
Print email, documents, pictures and contacts directly to
shared printers on a Wi-Fi network—no printer drivers
necessary. MOTOPRINT automatically discovers
networked printers for you. You can even save your
To Next Page
Loading...
Need help?
General
