Commands can open various applications on the
phone.
• To open Camera, Voicemail, Redial, or Received
Calls:
• Press and release Voice key
• Phone prompts user to say a command
• Say Command and phone opens application
Make a Call with Voice Commands
• Press and release Voice Button
• Say Name or Digit Dial
• When prompted either say the name of the
phonebook entry or say the digits in the phone
number
• By training the phone to recognize the voice
can improve voice dial.
• Press M > Settings > Personalize > Voice
Dial Setup > Adapt Digits
NOTE:
The phone will ask for verification after
you speak when using Name or Digit Dial.
Voice Commands
Headset
• The headset must be charged for two hours
prior to starting
• The headset must be paired with the phone
before it can be used. Please see the Bluetooth
Pairing Instructions that came with the headset
• Bluetooth must be turned On in the phone
(see following steps)
Turning Bluetooth Power On
• The phone’s Bluetooth feature is off by default
• Press M> Settings > Connection > Bluetooth
Link > Setup > Power > Change > On
NOTE:
Turn Bluetooth power off to
extend the battery time
Bluetooth
®
Pair with Headset
• Headset must be powered on and in pair
mode
• Press the call button on the headset for 6 to
10 seconds until blue indicator light comes on
• On phone Press M> Settings > Connection
> Bluetooth link > Handsfree > [Look for
Devices]
• Press OK or Yes to pair
• Enter the pass key 0000 and press OK
NOTE:
When headset is successfully paired
with phone, the blue indicator light changes
from a constant light to a flashing light
NOTE:
Music can not be played through
the Bluetooth headset
Phone
ANSWER A CALL
open phone or press N
MAKING A CALL
dial a number and press N
END A CALL
press P
smart key
volume keys
left soft key
browser key
send key
menu key
voice key
right soft key
iTunes key
4-way navigation with
center select
power/end key
To Next Page
Loading...
Need help?
General
