RADIO OVERVIEW
English
31
Charging a Radio and Battery using
a Multi Unit Charger- MUC (Optional
Accessory)
The Multi Unit Charger (MUC) allows drop-in
charging of up to 6 radios or batteries. Batteries
can be charged with the radios or removed and
placed in the MUC separately. Each of the 6
charging pockets can hold a radio or battery,
but not both.
1. Place the charger on a flat surface.
2. Insert the power cord plug into the MUC’s jack.
3. Plug the cord into an AC outlet.
4. Turn the radio OFF.
5. Set removable bracket for battery type.
6. Insert the radio or battery into the charging
pocket.
Notes:
• This Multi Unit Charger also allows you to clone
up to 3 radios (3 Source radios and 3 Target
radios). Refer to page 56 for details.
• Further details on MUC’s operation are explained
in the Instructions Sheet provided with the MUC.
For part number details, refer to the Accessories
section.
MUC LED Indicator
Status LED Status Comments
Charging
Steady Red
Indication
The charger is
currently charging
Charge
Complete
Steady Green
Indication
Battery is fully
charged
Battery
Fault (*)
Blinking red
(fast)
Battery was faulty
when inserted
Note: (*) Normally re-seating the battery pack
will correct this issue.
To Next Page
Loading...
Need help?
General
