5
English
• Installation of vehicle communication
equipment should be performed by a
professional installer/technician qualified in the
requirements for such installations.
An air bag’s size, shape and deployment area
can vary by vehicle make, model and front
compartment configuration (e.g. bench seat vs.
bucket seats).
• Contact the vehicle manufacturer’s corporate
headquarters, if necessary, for specific air bag
information for the vehicle make, model and
front compartment configuration involved in
your communication equipment installation.
• If mounted on an insecure or hollow mounting
surface, the bracket can loosen and the unit
can break free on collision. Mount the bracket
only in a location which allows the self-tapping
screws to solidly anchor into a metal surface.
• The mounting screws can damage cables and
wires that run under some mounting surfaces
in the vehicle. Contact the vehicle
manufacturer for the detailed locations of
cables and wires in your vehicle, and avoid
mounting the radio above those locations.
68012003023.book Page 5 Monday, December 10, 2018 3:11 PM
To Next Page
Loading...
