6 Pair & connect
Pair & connect
connect and go
Pair & connect with your phone
1 Turn off any Bluetooth devices previously paired
with your car kit.
2 Turn on the Bluetooth feature on your phone.
3 Turn on your car kit (see “Turn it on & off” on
page 4).
The status light becomes steadily lit in blue and you
hear “ready to pair”.
4 Follow the voice prompts to connect your phone to
your car kit.
Note: When prompted for the passkey, enter 0000.
When your car kit successfully pairs with your phone,
you hear “pairing complete”.
Note: After pairing, you may be asked by your phone
to grant phonebook access to your car kit. If prompted,
say "always accept".
For daily use, make sure your car kit is turned on, and
your phone’s Bluetooth feature is on. Your car kit and
phone will connect automatically.
To Next Page
Loading...
