Motorola Signal Booster User Manual

Signal Booster Installation Guide
To install the Signal Booster, perform the following steps and refer to the drawing below:
1. Connect the cable from your cable service provider or antenna (cable in) to the Signal Input on
the Signal Booster. (In typical installations, the input cable is already connected to the television
or VCR. Disconnect this cable and connect it to the Signal Input on the Signal Booster).
2. Connect the Signal Output on the Signal Booster to the television or VCR input using the supplied
6 foot coaxial cable.
3. Use the other 6 foot coaxial cable to connect the ac adapter to the Power 12 Vdc connector on
the Signal Booster.
4. Plug the ac adapter into a convenient wall outlet. The lighted, green LED confirms that power is
correctly applied.
You can mount the Signal Booster to any suitable indoor surface using the screws provided, or it may lay
flat.
120 Vac in,
12 Vdc out
adapter
F-type
connector
6 foot
coaxial
cable
Cable in
6 foot coaxial cable out to
televisions/set-top terminals
(Step 4)
(Step 3)
(Step 2)
(Step 1)
Power 12 Vdc
Signal Input
Signal Output
Broadband Drop Amp
52-1000 MHz Fwd (+15dB)
5-40 MHz Rtn ( -1dB) Part Number: 484095- 001-00
MOTOROLA and the Stylized M Logo are
registered trademarks of Motorola, Inc.
® R e g. U. S . P a t. & T m . O ff.
©200 1 M oto rola,In c. All rights rese rved .
Made in Taiwan
If You Need Help
If you need assistance while working with the Signal Booster, call Motorola’s Customer Service and
Technical Support Center at 1-877-466-8646.

Motorola Signal Booster Specifications

General

Impedance	50 ohms
Uplink Frequency	824-849 MHz, 1850-1910 MHz
Downlink Frequency	869-894 MHz, 1930-1990 MHz
Power Supply	AC 110-240V
Compatibility	LTE

Summary

Signal Booster Installation Guide

Installation Steps

Details connecting the Signal Booster's input, output, and power, and plugging in the adapter.

Mounting the Signal Booster

Instructions for mounting the Signal Booster indoors using screws or placing it flat.

Technical Support Information

Provides Motorola's Customer Service number for assistance with the Signal Booster.

Limited Warranty Information

Warranty Coverage and Exclusions

Explains what the Signal Booster warranty covers, including defects and exclusions.

Warranty Service and Duration

Details the warranty period, how to obtain service, and Motorola's sole obligations.

Limitation of Liability

Specifies Motorola's liability limits for damages arising from product use or inability to use.