To Next Page

To Previous Page

5EN Connect & go

Connect & go

let’s get you connected

Turn off any Bluetooth devices previously paired with

your speakerphone. Then:

Tip: After you pair the first time, if you take your device

out of range of the speakerphone and return, press the

Call button on your speakerphone twice, and the

devices will reconnect.

Turn on Bluetooth on your device.

Go to the Bluetooth menu on your device,

and enter passcode 0000 if prompted.

Turn on the car kit. After the blue light comes on

and you hear, “ready to pair,” follow the voice

prompts to pair and connect with the device *.

When the device and car kit connect,

you’ll hear “pairing complete” *.

* If your device doesn't support voice prompts, you'll hear a tone.

Motorola T6NL1 Manual

Other manuals for Motorola T6NL1