13EN Problems?
Problems?
we’ve got solutions
My speakerphone won’t enter pairing mode
Make sure that any devices previously paired with the
speakerphone are turned off. If the status light is
flashing in blue, first turn off the other device, then turn
the speakerphone off and on. The status light becomes
steadily lit in blue and you hear “ready to pair”.
My phone doesn't find my speakerphone when
searching
Make sure the status light on your speakerphone is
steadily lit in blue when your phone is searching for
devices. If not, turn off the speakerphone and press and
hold while turning on again and follow the voice
prompts to reset the speakerphone to factory default
condition. The speakerphone resets and you hear “ready
to pair” and see the status light steadily lit in blue.
My speakerphone worked before, but now it's not
working
Make sure your phone is on and the Bluetooth feature is
turned on in your phone. If the Bluetooth feature was
turned off or was turned on only temporarily, you may
need to restart the Bluetooth feature and pair your
phone and speakerphone again (see “Connect & go” on
page 5).
To Next Page
Loading...
Need help?
General