6 Connect & go EN
connect a second phone
1 Turn off the first device and any other Bluetooth
devices previously paired with your speakerphone.
2 Follow the same steps you used to connect the first
device, except this time use the second device.
To connect both phone(s) and/or music device, turn
these on and then turn your speakerphone off and on.
When you hear “Device One connected”, and “Device
Two connected”, your speakerphone is ready to go. The
last paired phone is your primary phone for calling
features.
Test your connection
1 Ensure your speakerphone is turned on.
2 On your phone, dial a phone number and press the
Call/Send key.
If successfully connected for calls, you hear ringing on
the Speakerphone.
To Next Page
Loading...
