Accessories
28
2. Insert the plug of the audio accessory firmly into the accessory jack (see
page 13).
3. Turn the radio on.
g displays.
4. Lower the radio volume before placing the accessory on your head or in your
ear.
5. To transmit, speak into accessory microphone. There is a short delay
between the time you start talking and when the radio transmits.
6. To receive, stop talking.
To turn VOX off, press
M
or remove the audio accessory.
Setting the Sensitivity Level (Models T5710, T5720 Only)
Adjusting your radio’s sensitivity level helps minimize the possibility of unintended
noises triggering a transmission and helps the radio pick up soft voices.
1. Press
\ until g displays.
2. Press
] or [ to select the sensitivity level:
Note: When you connect a VOX accessory, the radio is automatically set to the
last chosen sensitivity level.
3 = High Sensitivity
for quiet environments
2 = Medium Sensitivity
for most environments
1 = Low Sensitivity
for noisy environments
1042b60a.book Page 28 Friday, January 17, 2003 2:43 PM
To Next Page
Loading...
