EasyManuals Logo

Motorola TALKABOUT T92 User Manual

Motorola TALKABOUT T92
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
7
English
Note: There is a short delay between the time you start
talking and when the radio transmits.
Dual Channel Monitor
Enables you to scan the current channel and another channel
alternately.
To set another channel and start Dual Channel:
1. Press Menu button five times until the Dual Channel
icon appears. The Dual Channel will flash.
2. Press or to select the channel then press Menu
button.
3. Press or to select the Interference Eliminator Code.
4. Press the PTT button to exit menu or Menu button to
continue set up.
5. The radio starts to Dual Channel.
Note: If you set the same channel and code as the current
channel, Dual Channel Monitor turns OFF.
Silent Mode (Vibrate Alert)
Silent Mode (Vibrate Alert) notifies you that your radio is
receiving a message. This is useful in noisy environments.
When the alert is on, the radio vibrates once every 30 seconds
when you receive a message on the channel and code you set.
1. Press Menu button seven times until Vibracall icon
is displayed. The current setting will flash.
2. Press or to change the setting to On/Off.
3. Press the PTT button to exit menu or Menu button to
continue set up.
Keypad Tones
You may enable or disable the speaker key tones. You will hear
the key tone each time a button is pushed.
1. Press Menu button eight times until Keypad Tone
icon appears. The current setting On/Off will flash.
2. Press either or to turn On/Off.
3. Press the PTT button to confirm or Menu button to
continue set up.
Note: The following are not disabled when the key tone
feature is OFF:
•Transmit time-out alert tone
•Call tone
•Low battery alert tone or
•The transmitted talk confirmation tone
Transmitting a Talk Confirmation Tone
You can set your radio to transmit a unique tone when you finish
transmitting. It is like saying “Roger” or “Over” to let others know
you have finished talking.
1. Press Menu button nine times until the Roger Tone
icon appears. The current setting On/Off flashes.
2. Press or to turn On or Off.
3. Press the PTT button to set or Menu button to continue
set up.
MN002243A01_.book Page 7 Tuesday, March 20, 2018 5:27 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola TALKABOUT T92 and is the answer not in the manual?

Motorola TALKABOUT T92 Specifications

General IconGeneral
BrandMotorola
ModelTALKABOUT T92
CategoryTwo-Way Radio
LanguageEnglish

Related product manuals