• Your radio unmutes and the incoming call sounds through the speaker.
• The display shows the subscriber ID and call status.
NOTICE: For Broadcast Call, user is not allowerd to Talkback. The display shows Talkback
Prohibit and Talkback Prohibit tone sounds when PTT button is pressed.
Procedure:
• Perform the following actions to respond to call:
a. To respond, press the PTT button.
b. Wait for the Talk Permit Tone to end, and speak into the microphone.
c. To listen, release the PTT button.
MN006371A01-AA
Chapter 7: Calls
14
To Next Page
Loading...
