If your radio is connected to the BT device, your radio shows Connected and sounds voice
announcement.
If your BT device is disconnected from your radio, your radio sounds a tone and attempt to reconnect
to the same BT device within a reconnect Time Out.
10.3
Clearing Bluetooth Pairing
Procedure:
1 Long press the Contact/Info button.
2 Select Bluetooth Pairing → <device friendly name> → Menu/OK.
If clearing a paired Bluetooth device successfully, a positive tone sounds.
If clearing an unpaired Bluetooth device, a negative tone sounds.
MN006371A01-AA
Chapter 10: Bluetooth
18
To Next Page
Loading...
