CONNECT
Now let’s get Tracks Air and your device
talking to each other. There are two ways
to pair it: the Bluetooth
®
EASYPAIR™
Method and the NFC™ way. EASYPAIR™
works for everybody. NFC™ people —
you know who you are.
EASYPAIR
™
METHOD
STEP 1
Turn on Bluetooth and NFC on your device.
STEP 2
Tap your device to the top of the right sound engine.
Abracadabra. The device tells you when you’re connected.
NOTE
The above works for most devices, but not all
NFC readers are located in the same place or
function the same way. See your device’s user
guide for all the details.
STEP 4
When the device and TRACKS
AIR are connected, you’ll get a
pairing complete tone.
STEP 1
Turn on Bluetooth
®
on
your device.
STEP 2
Turn on TRACKS AIR and it
will automatically go into
pairing mode.
STEP 3
Go to the Bluetooth menu
on your device to pair and
connect.
NFC METHOD
It seems obvious, but you must have an NFC Bluetooth-
enabled device in order to use the NFC method. If you
don’t have it, use the Easypair Method.
To Next Page
Loading...
