13
ADVANCED STUFF
For Smarties
SECOND DEVICE /
MULTI-POINT CONNECTION
Do you use two phones? Do you use a tablet and a
phone? Are you double jointed?
You can connect up to two devices to your headset for
music and calls. As long as multi-point is enabled (see
SETTINGS on page 13), pair both devices and then you
can switch back and forth between devices seamlessly,
whether you’re playing music or managing calls.
Just follow the instructions under “Connect” on page
8 for each device. To connect both devices, just turn
them on.
MUSIC
Select a music source by pressing play on that device.
If you want to switch to your second paired device for
music, just hit play on that device.
SETTINGS
To hear settings, press and hold the power and
multi-function button. To change them, just follow
the voice prompts.
Factory Reset
(CAUTION “Reset” erases all paired devices stored in your headset.)
Voice interface on/off
Multi-point on/off
Wide-band audio on/off
(NOTE Use for increased clarity and richer sound. Not all devices or carrier
networks support Wide-band.)
NOTIFICATION LIGHT
The easy way to check your headset
NOTE
Your headset will only stream from one music
source at a time.
IF THE
LIGHT SHOWS...
Fading blue
Flashing blue
Steady blue
Flashing red
Flashing green
Steady Green
IT MEANS...
Turning on or o
In pairing mode
Device connected
Charging low power battery
Charging medium power battery
Battery fully charged
To Next Page
Loading...
