Ajay16 Motorola v3 Disassembly Guide v1.1
Page: 22
Compiled Exclusively for MotoModders.net
45. Get the Mic Cover and remove the rear black covering. Place it
into the new part.
46. Assemble the Mic Cover and the lower front housing. The mic
cover just slides in.
47. Go to the screen housing and dig out the small magnet. Dig it out
with anything you can ruin the housing just get it out. Or you can
buy a new one from Motorola’s USA parts centre or CNN.CN and
glue it in as I have done.
YOU NEED THIS PART OTHERWISE THE IMAGE WONT
CHANGE ON THE OUTER SCREEN WHEN THE PHONE IS
CLOSED