Motorola VM35-2 - Getting Started with Your Monitor; Connecting Power Adapters

10
Getting Started
2. Getting Started
2.1 Connecting the Power Supply for the Baby Unit
• Insert the DC plug of the power
adapter into the DC socket on the
back of the Baby Unit.
• Connect the other end of the
power adapter to a suitable
electrical outlet.
• The baby unit turns on and the
power indicator lights in Blue
colour.
Note
Only use the supplied power
adapter (DC5V/1000mA).
2.2. Connecting the Power Supply of the Parent Unit.
• Connect the small plug of
the power adapter to the
parent unit and the other end
to the electrical outlet. Only
use the enclosed adapter
(5VDC/1000mA).
• Press and hold the POWER
button
0
to turn it ON.
NOTE
• A rechargeable battery (Lithium ion battery 2000mAh) inside the
Parent Unit allows you to move it without losing the link and picture
from the Baby Unit. The battery provides up to 5 hours operation of
the Parent Unit. We recommend charging for at least 16 hours before
first use, and when the Parent Unit indicates the battery is low.