17Using the digital audio baby monitor
3.8.4 Use the patrol mode
This function is available if you have more than one baby (camera) unit.
1. Tap on the menu bar of the parent unit.
2. Tap and / / / will pop up.
3. The screen will display images from dierent registered cameras every 12
seconds.
3.9 Set the temperature unit
The baby (camera) unit has a temperature sensor that can detect the baby
room temperature.
1. Tap on the menu bar of the parent unit. °
C
/
°
F
will pop up on the screen.
2. Tap °
C or
°
F
to confirm the temperature format.
3.10 Power saving mode
1. Tap the in the menu bar of the parent unit, the screen o timer:
o
,
5m
,
15m
or
30m
(m = minutes) will pop up.
2. Select a screen o time.
3. The screen will be o after the time limit is reached.
4. Tap once on the screen to wake it up. Tap twice to open the menu bar.
Note
You can still hear the audio when the screen is o.
3.11 View multiple camera on screen
This function is available if you have more than one baby (camera) unit. When
the split screen function is on, you can view multiple cameras on the screen
and have a list of options.
• To turn on or o the split screen function, tap on the menu bar of the
parent unit.
• To select another screen, tap on the selected screen once.
• To hide or display the menu bar of that screen, tap on the selected screen
twice.
3.12 Default settings
Audio playback volume level 2
Brightness 4
Flashlight O
Temperature unit °F
Lullaby 1
Power saving 5 mins
Audio book 1
Temperature range 1 °C ~ 36 °C or 34 °F ~ 97 °F
To Next Page
Loading...
Need help?
General
