16
3.6 Set the timer
You can set timers on the parent unit to remind you or caregivers of the time
to feed the baby, change the baby’s diaper or put the baby to bed.
1. Tap on the menu bar of the parent unit.
2. Tap
on
to turn on the timer, then tap or to select the time. Each key
press represents an interval of 15 minutes, up to an interval of 6 hours.
3. If the next feeding time is 4 hours later, press or to adjust the timer
until 04:00 is displayed.
4. Tap
set
to confirm the time, will appear on the status bar.
5. The parent unit will beep when the time limit is reached. Press any key to
stop the timer.
3.7 Two-way talk
You can use the Talk Back feature to comfort and reassure your baby. Whilst
using Talk Back you will not be able to hear your baby until you release the
button.
1. Tap on the menu bar of the parent unit, Touch to talk will be displayed
on the screen.
2. Tap to talk to your baby through the parent unit's speaker. Tap on
the screen when you finish speaking.
3. Tap on the menu bar to turn o the talk back feature.
3.8 Use the camera
3.8.1 Pair or add a camera with the parent unit
See 'Registering the baby (camera) unit to the parent unit (Pairing)' on
page 13.
3.8.2 View a camera
1. Tap on the menu bar of the parent unit.
2. Tap and / / / will pop up.
3. Tap / / / to select a desired camera to view the picture
from that camera. The selected camera will appear in dark grey on the
screen.
3.8.3 Remove a camera
1. Tap on the menu bar of the parent unit.
2. Tap and / / / will pop up.
3. Tap / / / to select a desired camera to remove it from
registration.
Note
You cannot remove the camera if it is the only registered camera in the parent
unit.
Using the video baby monitor
To Next Page
Loading...
